Description
The ManiVac System 2X with Rigid Loc-Line Hose removes harmful manicure dust while you file. It's a compact, modular source capture system with a 36" rigid hose, and at 53 dBA it stays quiet through a full book.
| Spec | ManiVac System 2X with Rigid Loc-Line Hose |
|---|---|
| Airflow | 120 cubic feet per minute (CFM) |
| Capture | 99.99% of dust particulate at 0.02 microns |
| Noise | 53 dBA |
| Filter | Double-layer disposable HEPA filter bag, easily replaced |
| Hose | Rigid Loc-Line, 36 inches |
| Main unit | 10" x 14" x 12" |
| Fit | Most standard and custom-made manicure stations |
| Warranty | Full one year |
Which ManiVac is right for you? The System 1 is the compact model for individual workstations. The System 2X is the higher-capacity model, sold with this rigid hose or with an articulated hose. Still comparing types? Read how to choose a nail dust collector.
Does it meet state regulations? Both ManiVac systems meet all current U.S. state regulation as a source capture system capable of exhausting not less than 50 CFM per station. They run at 120 CFM, capturing even more dust particulate and odor.
Will it fit my station? It fits most standard and custom-made manicure stations, and it's easy to install.
How do I change the filter? The double-layer disposable HEPA filter bag is easily replaced. Replacement filters come in Version A and Version B, sized to fit each ManiVac model.
Legal Info
(4) In IMC, Table 403.3, Note h is deleted and replaced with the following: For a nail salon where a nail technician files or shapes an acrylic nail, as defined by rule by the Division of Occupational and Professional Licensing, in accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking Act, each nail station where a nail technician files or shapes an acrylic nail shall be provided with..
- a. a source capture system capable of filtering and recirculating air to inside space not less than 50 cfm per station; or
- b. a source capture system capable of exhausting not less than 50 cfm per station. Except as provided in paragraph 3, the requirements described in paragraph 1 apply to begin on July 1, 2020.
The requirements described in paragraph 1 apply beginning on July 1, 2014 if the nail salon is under or begins new construction or remodeling on or after July 1, 2014.(5)
In IMC, Section 403, a new Section 403.8 is added as follows: "Retrospective effect. Removal, alteration, or abandonment shall not be required, and continued use and maintenance shall be allowed, for a ventilation system within an existing installation that complies with the requirements of this Section 403 regardless of whether the ventilation system satisfied the minimum ventilation rate requirements of prior law."







